Weekend Project # 9 : Built in Desk Area Makeover


On to my built in desk area….let’s get this weekend project started.

I know it wasn’t that bad to start, but I wanted to elevate the appearance of the area to fit in with the rest of my home. The problem is I wasn’t sure how. I usually have to concentrate for a long time on a space and eventually I’ll find something like a picture or fabric that puts the plan in motion.

My walls were freshly painted at the same time as the Master Bathroom makeover. I had an idea for a decorative shade to place over the window to defuse some of the heat of summer or colder temperatures of winter, but finding the right combination of materials like everything in design (on a budget) takes time.

It began with a piece of decorative crown moulding, that with the help of my handyman Tim was formed into a small valance to hang the shade from. Hidden from view I actually used thumb tacks to fasten the fabric to a wood slat affixed behind the moulding. The initial fabric (a curtain panel) did not provide the desired look and several months would pass before the right materials came along (that turned out to be right in front of me the entire time).

Tim painted the valance with the same medium shade Graceful Gray used on the base boards, window and door frames and left it in the garage to dry overnight. Later that evening I went to get something in the garage and went over to examine the painted moulding. It looked so plain and boring. The beautiful carving of the moulding was not at all accentuated.

In a bold move, I tried to think about what I had that I could use to fill in the carved areas and remembered this Metallic Lustre’ paste in my art box of paints and a small bottle of metallic gold model paint from the craft store. Equipped with a small piece of fabric torn from an old t-shift, I dipped it into the lustre’ paste and slowly rubbed it along the top edges of the carvings. When it would fill too much of the area, I would use another piece of the t-shirt to wipe the excess away, leaving more in some areas and less in others. It didn’t work as well on the top wider area, the carving wasn’t deep enough – so here I used a small, thin, pointed brush and the gold model paint to fill in all of the top area. Little by little it created a more interesting aged finish.

Once all of the parts were put together, the fabric wasn’t achieving the look I was hoping for. As I’ve said in the past, patience is required. I decided to let it sit there for a while and give myself time to look around at different materials that would create the casual elegant result I was hoping to achieve. The project was set aside, and more than a few months passed before I was able to redirect my focus on it again.

Recently, I visited a new home decor store in my area. While browsing through the various items there, I was drawn toward two framed prints in black, gray and white hues. While my home is composed of shades of cream, ivory, soft blues, grays and some mustard golds, I am drawn to soft black accents. I purchased one of the framed prints and the shop owner kindly offered to hold the second, allowing me time to figure out where I would use them before committing to the second.

Daphne Home Butterfly

After experimenting with different locations in the house, I decided that I could place one framed print on each side of the built in desk area. With that decision, I now had something to inspire the shade and desk accessories.

I turned my focus toward my breakfast room, inspired by a picture I cut from a decor magazine that I was throwing out. As purchases were made to replace the furnishings there, I posted two chairs and two benches that were being replaced on a Facebook market page to sell the items. The fabric on the benches (below) caught my eye. I’d always liked the fabric purchased to recover the benches and made a remark to my friend when she was at the house, that this same fabric had the sophisticated look I wanted to create the shade for the window by the desk. She agreed.

The fabric on the benches that inspired by window shade for the desk area (this room now also made over).

The problem was that I would have to find new fabric. I originally purchased the fabric from Hobby Lobby about 5 years ago and they no longer carried it. So I started searching online and found it! I ordered three yards, with the intension of saving a yard of the fabric to recover the desk chair seat. I also ordered a kit to make large covered buttons on Etsy.

When the fabric arrived I was a little upset. As I removed the folded fabric from the packaging, it appeared to be a different version of what I had ordered. It was the same pattern, but different colors. Busy with work I set it aside, but every time I passed the folded stack of fabric, thoughts ran through my head of how I needed to figure out what I was going to do. I carried it over to the desk area and held it up to the window trying to convince myself this was better. Then I unfolded the fabric to discover that, it was in fact the fabric I had ordered- It had been folded inside out! While I had a good laugh, it was a great accidental discovery, because I immediately decided I would use the back side of the scraps to cover the buttons that create a nice contrast against the lighter fabric shade.

I spent several hours measuring, trimming, pinning and then ironing the side seams. I then put together a design completely held together with straight pins in order to hang it and look at it for a couple of days. One evening I took the trimmed away side scraps and using the reverse (back) side of the fabric, covered several large buttons to somehow incorporate into the design of the shade. I then slid a button on a straight pin in areas to decide where they should be placed. Black stitching was added to each side of the fabric. (See notations on the photos

During the Christmas season, I found a large wooden spool of black velvet polyester ribbon by Martha Stewart at HomeGoods. I had purchased it when the intention of wrapping Christmas gifts with it, but when I wanted something to outline the fabric I turned to the ribbon. (See note below each photo explaining how the shade and moulding valance were pulled together.)

My mother’s old sewing machine that I rarely used had stopped working, So I brought the fabric to an alterations shop and had the sides stitched with black thread and the opposite edges surged with an ivory thread. With finished edges I laid the fabric out on my dining room table, once again pinning the folds and then hand stitched all of the buttons on. The folded edges also needed some reinforcement due to the weight, so I also hand stitched those areas together.

I then replaced the light fixture in the room, selecting a black drum shade with a bronze interior. The granite counter top that came with the house also limited my color palette, but the colors I chose appear to blend right in.

Black metal ceiling mounted light fixture with bronze interior.

I then brought the remaining fabric and my chair to an upholster to recover the seat cushion. Wall art hung, faux shade completed and also hung, chair recovered and light fixture installed, this weekend project was complete with a touch of sophistication. I had ordered it with a black piping around the bottom edge to match the outlined shade, and when I picked up the chair they advised me they decided to use only my fabric! At this point I wasn’t thrilled, but I went with it for a couple of days. I then decided to look for a black cord that I could glue along the edge with fabric glue. For $2.60, I think it was worth it. I feel like it looks more finished.

After until I found the lamps

I ordered two wall lamps for another project. When the lamps arrived they were much larger than I was expecting and were not going to fit into the project as I had hoped. I walked around the house in search of an alternate use. I returned to my desk area and examined the lamp that I originally used. I wasn’t completely satisfied with the lamp and have continued to search for something that provide that same cozy scholastic drama of lamp lights found in historical libraries. I thought of a gold lamp with a black shade with a better scale to fit the area, but nothing had caught my eye yet. I put one of the wall lamps together and held it up to the wall. I looked at it for a few days and added a light bulb, holding the illuminated light up to the wall during daylight hours as well as night. By the end of the week, I reached out to Tim to find out when he could come by to install one on each side of the window.

The project is now truly complete and serves as a great spot to write my future blog posts!

1 thought on “Weekend Project # 9 : Built in Desk Area Makeover”

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s